Eliminate down time by incorporating the Chart Cryo-Switch in your liquid nitrogen application. By adding the Chart Cryo-Switch to your application, you enjoy the continuous supply of liquid nitrogen, the same as if you were running from a large bulk supply. In addition to eliminating down time due to empty cylinders, the Chart Cryo-Switch also allows you to use the entire amount of product in the cylinder, before it changes to a reserve full cylinder. Many times, using conventional methods, gallons upon gallons are left in the cylinder and sent back to the supplier. Keep in mind, those are gallons you have already paid for, yet never used!
By using the Allen Bradley PLC, the Cryo-Switch is very easy to use. The PLC allows various low-level signals and alarms to assure the supply of liquid nitrogen will not be interrupted. The use of such signals allows you to change the cylinders in a more manageable fashion, rather than in a panic, emergency manner.
The Cryo-Switch can be used in liquid nitrogen, oxygen, or argon applications. The Cryo-Switch is factory set to switch based on pressure, temperature or from remote signal. It is easy to install and is operational in minutes.
* Eliminates interrupted time in process due to empty cylinders.
* Utilizes all the product in the cylinder, reducing wasted product.
* Signals and alarms to indicate low supply levels.
* For Nitrogen, Oxygen, or Argon use.
CHOOSE THE METHOD OF SWITCHING:
* Connections: 1/2 JIC Flare
* Additional Cylinder Connections
* Vacuum Insulated Flexhoses
WE RESERVE THE RIGHT TO END LISTING AT ANY TIME FOR ANY REASON.