Up
|
Max. Lift Height- Measured @ Pivot Pin: 76" Max. Lift Height- Under Level Bucket: 71" Clearance w/ Attachment Dumped 45 degrees: 59" Reach w/ Bucket on Ground: 44" Max. Rollback Angle: 22 degrees Overall Height in Carry Postion: 45" Lift Capacity to Max Height- @ Pivot Point: 725lbs. Lift Capacity to Max Height- 31.5" Forward of Pivot Point: 515 lbs.* Lift Capacity to 59" Height- @ Pivot Pin: 800lbs. Lift Capacity to 59" Height- 31.5" Forward of Pivot Pin: 595lbs. Breakout Force- @ Pivot Pin: 1340lbs. Breakout Force- 31.5" Forward of Pivot Pin: 960 lbs.* Rollback Force @ Max. Height- 31.5" Forward of Pivot Pin: 1155lbs.* Rollback Force @ 59" Height- 31.5" Forward of Pivot Pin: 1330lbs.* Rollback Force at Ground Level- 31.5" Forward of Pivot Pin: 1055lbs.* Raising Time- Ground Level to Full Height: 3.5 sec Lowering Time- Full Height to Ground: 2 sec Bucket Dumping Time- Full Rollback to Full Dump: 3.5 sec Bucket Rollback Time- Full Dump to Full Rollback: 2 sec Tractor HP Range: 12-25 (2 & 4 WD) Specifications based on tractor system of 1875 psi hyd. pressure and 4 gpm pump cap. A. Maximum Digging Depth: 7'0" Digging Depth (two foot flat bottom): 6'6" C. Loading Height (bucket @ 60 degrees): 4'4" D. Reach from Center Line of Swing Pivot: 9'4" E. Transport Height (Max): 5'6" F: Bucket Rotation: 180 degrees G. Loading Reach (bucket @ 60 degrees): 4'6" J. Stabilizer Spread, down position: 7'2" K. Stabilizer Spread, up position: 3'7" Bucket Cylinder Digging Force: 2970 lbs Dipperstick Cylinder Digging Force: 1480 lbs. Hydraulic Volume Requirements: 6 GPM Hydraulic Pressure Requirements: 2400 psi 1. Lot Cam: http://corriherptz.axiscam.net:9552/ 2. Showroom: http://corrihershowroom.axiscam.net:9554/ 3. Lower Lot: http://lowerlot.axiscam.net:9553/ 4. 3-Bay Service: http://corrihertractors.axiscam.net:9550/ 5. Service Cam: http://corrihershopcam.axiscam.net:9551/ |
