Up
|
Metal Sound Proof Enclosure Chamber about 7' by 5' by 5'. Put your big loud irritating compressor or pump inside this and make it quite. Should make for pretty good temperature stability too with all the insulation. This is a five sided unit-no floor. Inside is about 84" long by 59 wide by 65 tall. The interior walls are lined with perforated metal as shown below. The space is then filled with what appears to be fiberglass insulation about 4" thick. There is a louver in one side wall as shown above for ventilation. There are 3 through-holes in the roof as shown below-we assume for electrical and air lines. There is an opening at the bottom of the back wall for ?? ventilation? Overall exterior dimensions are about 93 by 68 by 72" tall. The door is about 59" wide by 65" tall. The door is about 4" thick. Note the internal latch release. The walls are about 4.25 inches thick. The image below shows the door seal detail. Similar related items may be listed separately or available on request. Might be just what you need for your equipment sound enclosure application. Condition looks well used and a bit abused but serviceable. Bottom edges could use a bit of straightening. There is one section of the ceiling perf-metal that is torn-looks like a forklift got it. Sold as-is-where-is. What you see is what you get. We are in the Desert Southwest so items may need dusting/cleaning when they arrive. Click cavlon99 all to see items from the past 30 days-might be something you need that did not sell. Click here to check for last minute updates and cavlon99 news. This item may be subject to government export/import restrictions. Click the following link for rules regarding sale/resale of US government property Sale of Government Property. |