Up
|
K.O. LEE MODEL B2062HB TOOL & CUTTER GRINDER WITH HEAVY DUTY SPINDLE Distance between tailstocks 32" Distance between centers in workhead and tailstock 26" Distance between collet in workhead and tailstock 27" Distance between B946 chuck face and tailstock (1" hole through chuck) 25-1/2" Table working surface 5-1/4" x 37-1/4" Total crossfeed movement 7-1/4" Feed per revolution of handwheel (.001 grad.) .100" Fast feed per revolution of handwheel 2-13/16" Slow feed per revolution of handwheel 9/16" Vertical movement of column 7" Feed per revolution of handwheel (.001 grad.) .050" Swing over table (1" & 2" raising blocks available) 8-1/4" Minimum distance centerline of wheel shaft to top of table 3-3/4" Maximum distance centerline of wheel shaft to top of table 10-3/4" Maximum distance from column to outside of straight wheel; dovetail slide not extended, spindle 90 deg. to table 4-1/2" Maximum distance from column to outside of straight wheel; dovetail slide extended, spindle 90 deg. to table 10-11/16" Centerline height of fixtures to top of table 4.130" Table swivels (calibrations: 3" per ft., 15 deg. either side of center) 225 deg. Spindle speed range (heavy duty grinders) 1150 - 7760 Maximum I.D. depth hole size 9/32" to 2" capacity with standard arbors 2-3/4" Maximum crossfeed surface grinding Heavy duty grinders (8" wheel) 4-1/4" With S1055CR quill (7" wheel) 5-3/4" Longitudinal power feeds 3/4 - 20 fpm Grinding wheel hole size 1-1/4" Ball track table for easy hand movement Hydraulic power unit for table traverse Heavy duty grinding spindle B955 HD |