CINCINNATI 0-8 SIMPLEX PRODUCTION MILLING MACHINE
Table working surface 6-1/2" x 23-11/16"
Longitudinal (power table travel) 8"
Vertical movement of spindle carrier - hand 6"
Power (automatic) vertical movement of spindle carrier -
Maximum distance from centerline of spindle to table 7-1/2"
Minimum distance from centerline of spindle to table 1-1/2"
Distance from centerline of table to face of spindle carrier 5-1/4"
Maximum distance from spindle nose to inside of arbor support 9-3/4"
Maximum distance from spindle carrier face to inside of arbor support 10-5/8" Quill
Maximum distance from spindle nose to centerline of table 4-3/8"
Minimum distance from spindle to centerline of table 3-3/8"
Minimum distance from spindle nose to spindle carrier face 7/8"
Spindle No. 40 Series Taper Hole
Number (feed rates selected with pick-off gears) 16
Range (standard series) 1/2" to 20" per min
Power rapid traverse 400" per minute
1-1/2 HP 3/60/208-220/440 Main drive motor & push button controls
Automatic table cycle functions
Eight (8) misc. table feed change gears
Built-in electrically operated coolant system