Up
|
Brand New GR50 Log Grapple with R45 Hydraulic Rotator Head. * This Log Grapple & Hydraulic Rotator Head are available as a unit (as shown in photo) for installation on your own Supporting Structure. Some typical Examples would be: * The end of a Logging Trailer articulated Boom. * The end of a Backhoes Dipper Stick. * The end of a Boom mounted on a Front End Loader. * The end of a Boom mounted on Skid Steer Loader Arms. * The end of a Boom mounted on a Tractors 3 Point. * Comes complete & ready to install including hoses & fittings as shown in photo! * Your Tractor or Skid Steer will need Dual Hydraulic Remotes. * Maximum Gripping width is 50-3/4". * Minimum Opening is 3-1/2" ! * Max Lift Capacity is 3080lb's. * Height in the open position is 26-3/8". * Height in the Closed Position is 19-1/2". * Width of the widest Claw is 11". * Working Pressure Rating is 2900psi. * Jaw Steel thickness is .403". * Jaw Material is Raex 640. * Grapple weight is 209lb's. * Rotator Head is CONTINUOUS in Both Directions!!! * Maximum Load is 9900lb's! * Max Working Pressure is 3000psi. * Torque Rating is 737ft lb @ 2320psi. * Pin Hole for attaching to Grapple Hanger is 1" Diameter. |