Brand New GR36 Log Grapple with R30 Hydraulic Rotator Head.
* This Log Grapple & Hydraulic Rotator Head are available as a unit (as shown in photo) for installation on your own Supporting Structure. Some typical Examples would be:
* The end of a Logging Trailer articulated Boom.
* The end of a Backhoes Dipper Stick.
* The end of a Boom mounted on a Front End Loader.
* The end of a Boom mounted on Skid Steer Loader Arms.
* The end of a Boom mounted on a Tractors 3 Point.
* Comes complete & ready to install including hoses & fittings as shown in photo!
* Your Tractor or Skid Steer will need Dual Hydraulic Remotes.
* Maximum Gripping width is 36".
* Minimum Opening is 1-1/2" !
* Max Lift Capacity is 2200lb's.
* Height in the open position is 33-5/8".
* Height in the Closed Position is 17".
* Width of the widest Claw is 10".
* Working Pressure Rating is 2900psi.
* Jaw Material is Raex 640.
* Grapple weight is 110lb's.
* Rotator Head is CONTINUOUS in Both Directions!!!
* Maximum Load is 6600lb's.
* Max Working Pressure is 3000psi.
* Torque Rating is 516ft lb @ 2320psi.
* Pin Hole for attaching to Grapple Hanger is 1" Diameter.