Up
|
14" x 40" KELLENBERGER MODEL 1000U-125 UNIVERSAL GRINDER Motor Driven With 4.5 HP, 3 Phase, 60 Cycle, AC Spindle Drive. MD Workhead. MD Hydraulics. Complete Electrical Controls. 270° Swiveling Wheelhead With Indexing And Clamping Every 90°. External Grinding Wheel (LH) And Face/Surface Grinding Wheel (RH). Indexing And Clamping Every 90° Allows For Multiple Operations To Be Performed In One Chucking Of The Workpiece. Rise & Fall Mechanism For Grinding Wheelhead. 360° Swiveling Workhead With Combination Live/Dead Spindle. Hydraulic Infeed. Hydraulic Traverse. Plunge Feed. Pick Feed. Dwell Timer. Shift Knob For Coarse/Fine Feeds. Surface Grinding With Wheelhead Downfeed. Inch Reading Dials. 2-Axis Sony Model LH52-3 DRO. Coolant Pump And Tank. Table Mounted Dresser. Lever Operated Collet Chuck. 8"6-Jaw Chuck. Leveling Pads. Distance between Centers 39-3/8" Maximum Swing over Table (with Riser Block) 14" Traverse per Revolution of Handwheel Coarse .8" Traverse per Revolution of Handwheel Fine .1" Traverse Speed (Infinitely Variable) .06-18 FPM Dwell at Reversal (Infinitely Variable) 0.5 Sec Travel with Handwheel Coarse/Fine 9-5/8" Infeed per Revolution of Handwheel Coarse .3" Infeed per Revolution of Handwheel Fine .04" Rapid Advance and Retraction, Hydraulic 1-9/16" Plunge Grinding, Infeed Speed .00001-.0001 Traverse Grinding, Infeed per Table-Slide Reversal .00004-1.18 Grinding Wheel for OD Grinding 16" x 2" x 5" Grinding Wheel for Right Hand Spindle End 9" x 3/4" x 3" Spindle Speeds 1500, 1700, 2200 RPM Wheelhead Swivel Range ±8 to -195° Carrier Bore for Internal Grinding Spindles 3-5/32" Spindle Speeds (Infinitely Variable) 20-400 RPM Internal Taper of Work Spindle No. 5 Morse |