Up
|
HARDINGE PRECISION TOOLROOM LATHE MODEL: HLV-H, NEW: 1983, S/N: HLV-H-110444T BACKLASH IN CROSS SLIDE SCREW, .003 BACKLASH IN COMPOUND SCREW, .001 PLAY IN CARRIAGE HANDLE, .005 TO .010 SPINDLE CONSTRUCTION ........ HARDINGE SUPER-PRECISION SPINDLE NOSE ........................ HARDINGE TAPERED INF. VARIABLE SPINDLE SPEEDS ......... 125 TO 3000 RPM HOLE THROUGH SPINDLE .......................... 1-1/4" W/ROUND 5C COLLETS ........................... 1-1/6 W/HEXAGON 5C COLLETS .......................... 7/8" W/SQUARE 5C COLLETS ........................... 3/4" W/STEP CHUCKS ........................ 1-1/16" TO 6" W/JAW CHUCKS .................................... 5" W/EXPANDING COLLETS ............................. 3" SWING OVER BED ................................... 11" SWING OVER CARRIAGE ............................... 9" SWING OVER CROSS SLIDE ............................ 6" DISTANCE BETWEEN CENTERS ......................... 18" COMPOUND SLIDE TRAVEL ............................. 3" CARRIAGE POWER FEED RANGE ............ 5/16" TO 7" IPM CROSS SLIDE POWER FEED RANGE ......... 3/16" TO 4" IPM TAILSTOCK SPINDLE DIAMETER .................... 1-3/8" TAILSTOCK SPINDLE TRAVEL ...................... 3-3/4" TAILSTOCK SPINDLE TAPER ........................ #2 MT THREADING RANGE (27) ................. 11" TO 108" TPI APPROX. DIMENSIONS ... LxWxH ......... 65" x 28" x 58" APPROX. WEIGHT ............................ 1,800 LBS. HARDINGE DRILLED, TAPPED & T-SLOTTED FACEPLATE ASSORTMENT OF 5C COLLETS, 29 pcs #55 & 60 GEARS FOR 10 TPI, CAPABLE OF METRIC THREADING, SEE PAGE 12 IN MANUAL AND PAGE 15. .5 /1 HP,TWO SPEED MAIN DRIVE MOTOR MACHINE IS WIRED FOR 208 VOLT OPERATION INSPECT UNDER POWER IN OUR FLORIDA WAREHOUSE CONDITION: **** EXCELLENT **** Due to our high volume, we receive very good freight discounts. Call or e-mail for quote to your ZIP. |
